Re-integrating SourceSafe with VS.Net

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

No One - 26 Nov 2004 06:56 GMT

Recently I had checked out files I needed and worked off line on a
project with VS.Net and using VSS for source control. Since then,
VS.Net has not been integrated with VSS and I have to use the VSS client
in order to check files in and out, and to add new files to the
project. How can I get VS.Net to be re-integrated with VSS?

Reply to this Message

Tim Macaulay[MSFT] - 29 Nov 2004 14:53 GMT

Try selecting Source Control from the File Menu and then Change Source
Control. Here you should have Bind, Un-Bind, Connect, DisConnect.

Depending on the status of your Sourcesafe connection you should be able to
choose one of those options and re-integrate with Sourcesafe.

Cheers,
Tim Macaulay
Microsoft Corp.
This posting is provided "AS IS" with no warranties, and confers no rights

Reply to this Message

No One - 30 Nov 2004 09:56 GMT

> Try selecting Source Control from the File Menu and then Change Source
> Control. Here you should have Bind, Un-Bind, Connect, DisConnect.
>
> Depending on the status of your Sourcesafe connection you should be able to
> choose one of those options and re-integrate with Sourcesafe.

Thanks. I was able to get them bound again, plus add to more projects in the
solution to SourceSafe.

Reply to this Message

Joe Masters - 03 Dec 2004 20:34 GMT

Try the File->Source Control->Open from Source Control command.

Joe

> Recently I had checked out files I needed and worked off line on a
> project with VS.Net and using VSS for source control. Since then,
> VS.Net has not been integrated with VSS and I have to use the VSS client
> in order to check files in and out, and to add new files to the
> project. How can I get VS.Net to be re-integrated with VSS?

Reply to this Message

Rate this thread:

Re-integrating SourceSafe with VS.Net

Free Magazines